This is the W7RNA Multiband WebSDR receiver at Sedona, AZ. - approx. 100 miles (160km) north of Phoenix - operated by Steve, W7RNA. Email me HERE. Software is provided by Pieter-Tjerk, PA3FWM. For more information about the WebSDR project, visit http://www.websdr.org. You may also access this receiver at: http://w7rna.org .

Equipment: Softrock EnsembleII SDRs with a number of RTLSDRs through a Linux server.



-- The simple Internet Address of this SDR is "http://w7rna.com".
-- W7RNA Tunable HF SDR(to 30MHz) HERE. (Adds an additional browser window.)
-- Western States, for further SDR receiver coverage in the West, try the following two top notch WebSDRs, both using commercial HF omnidirectional Log-Periodic antennas:
---- The "KFS" WebSDR, at Half Moon Bay - South of San Francisco - Click HERE. (Adds an additional browser window.)
---- The "Northern Utah WebSDR," North of Salt Lake City - Click HERE. (Adds an additional browser window.) -->
For current solar and propagation conditions, click HERE. See D-Layer absorbtion: HERE
This System #2 is experimental.
It seems you are using a mobile device; click here to switch to the mobile version of this site.
It seems Java is not installed or disabled on your computer. You need to install and/or enable it for this website to work properly.
Since Java version 7u51, Java needs to be enabled separately for each website; see http://websdr.org/java.html for instructions.
Your browser does not seem to support HTML5 WebAudio; please try a recent version of Firefox, Chrome, Opera or Safari; or switch to Java.

!!!!!!Attention Google Chrome Users!!!!!! The latest update adds a feature that mutes audio that "autoplays" on web sites. However it also may be muting audio on WebSDR sites. Clint, KA7OEI (Utah SDR), has provided us all a web page to help us deal with this issue. Here's the link: Click HERE.

SDR System #2 Frequency Bands:
1.8-2.0 2.0-3.4 3.54-3.73 3.85-4.0
4.7-6.2 6.2-7.7 7.7-9.3 9.3-11.4 11.4-13.4

SDR System #2 Frequency: kHz
You may also tune by clicking/dragging the scrollwheel on the
frequency scale. (On "AM," Steps are .1,1,and 5kHz)

Presets:
Ham Bands:
SWBC:
AM Operators:

Ham Misc:

Ham Nets:

SW Stations:

Time Stations:

MWARA/Air Traf:

HFGCS/USAF:


USCG/Hurricane/WX:



[scale]
? dBm; peak= ? dBm;

mute squelch autonotch
Volume:
Signal strength plot:


My Memories (SDR System #2) :
Waterfall Zoom & Speed:
 Speed:
 Size:   
(Or use scroll wheel and dragging on waterfall.)  View:  

Mode/Bandwidth:
? kHz @ -6dB; ? kHz @ -60dB
(Or adjust bandwidth by dragging passband edges on the freq scale.)
Bandpass Freq Shift:

Logbook:
Call of station that you hear:
Comments:
(Time, freq, your name/call, and DXCC info added automatically.)
View the last 20 lines of the logbook, or the entire logbook



The Sedona WebSDR is currently being used by ? user(s) simultaneously:      compact view


Operating Hints for this Receiver:
-- The Sedona WebSDR defaults narrow bandwidth settings to mitigate noise and QRM. You can use the bandwidth settings to make adjustments that work best for you. Save these settings to memory if you want to keep them.
-- The "Memories" function stores the frequency, mode, and your bandwidth settings for the frequency you want to keep.
-- On the condensed frequency bands that have a wider frequency span, click your mouse in the general area of the band you want to hear, and then click the "Max In" button to zoom in and center on that part of the band. Now you can click the "Zoom Out" button as needed to see specific views of your desired area of the band.
-- On AM, interference is almost always on ONE sideband. Using your mouse, grab the left or right edge of the yellow bandpass indicator and pull in towards the carrier frequency...interference gone!
-- You can use the space bar to mute/unmute this rcvr. Just hold your keyboard's "CTRL" key down while clicking on the SDR "Mute" box. Your spacebar is now a mute/unmute control.
-- If the orange tags are wrong or missing from the tuning dial - it can happen - just place your curser in the waterfall and left-click. Voila!

-- You can directly open this WebSDR with a specific frequency and mode using a customized link. For example,"http://w7rna.dyndns-remote.com:18901/?tune=5000" tunes to 5000kHz WWV.

Statistics: